52. H.Y. Kim, J.Y. Seo, H.K. Jung, H.K. Sung, W. Shin, H.M. Kim, N.H. Kim, I.D. Jung**, Direct Energy Deposition for AI assisted Smart SMR, In preparation, 2024

51. J.Y. Seo, T.K. Kim, I.D. Jung**, Machine learning enhanced continuous casting for high quality steel, In preparation, 2024

50. E.H. Seo, H.K. Sung, I.D. Jung**, J.W. Park, Corrosion behavior characterization for electron beam melt artificial implant, In preparation, 2024

49. T.K. Kim, K. Kim, H. Kim, N.H. Kim, I.D. Jung**, Reinforcement learning based tool path optimization with minimized residual stress, In preparation, 2024

48. J.Y. Jeong, W. Habib, S.K. Seol, I.D. Jung**, Direct ink writing for AI assiated object shadow detection, 2024

47. T.K. Kim, K. Kim, W. Habib, I. Jeon, I.D. Jung**, Ensemble network for high phase stability in perovskite, In preparation, 2024

46. S.B. Park, J.H. Kim, W. Habib, S.K. Seol, I.D. Jung**, Electro-assisted prussian blue writing on intelligent lens, In preparation, 2024

45. H. Jeon, W. Habib, S. Park, J. Pyo, S.K. Seol, N. Kim, I. Jeon, I.D. Jung**, 3D Printing of Luminescent Perovskite Quantum Dot–Polymer Architectures, Accepted, Advanced Functional Materials (IF: 19.0, JCR < 5% in Physics, Applied, JCR < 5% in Chemistry, Multidisciplinary), 2024, Headline [연합뉴스][한경][서울경제][아시아경제][베리타스알파][스포츠조선][배타뉴스][전기신문][전자신문][뉴시스][네이트뉴스][줌뉴스][울산신문][울산메일][울산제일일보][정보통신신문][메트로신문][파이낸셜뉴스][비즈니스코리아][KPI뉴스][노컷뉴스]

44. A. M. C. Baek, E. Park, M. Seong, J. Koo, I.D. Jung, N. Kim, Multi-objective robust parameter optimization using the extended and weighted k-means (EWK-means) clustering in laser powder bed fusion (LPBF), Accepted, Expert Systems with Applications (IF: 8.5, JCR < 15% in Computer Science, Artificial Intelligence, JCR < 7% in Operations Research & Management Science), 2024

43. S. Lee, T. Kang, I.D. Jung, W. Ji, H. Chung, An ANN-assisted efficient enriched finite element method via the selective enrichment of moment fitting, Accepted, Engineering with Computers (IF: 8.083, JCR < 5% in Engineering, Mechanical), 2024


42. W. Habib, J.H. Kim, J.H. Kim, I.D. Jung, J.Y. Pyo, S.K. Seol, 4D Printing of Ultra-stretchable Magnetoactive Soft Materials Architectures for Soft Actuators, Accepted, ACS Applied Materials & Interfaces (IF: 9.5, JCR < 16% in Materials Science, Multidisciplinary), 2023

41. T.K. Kim, N.H. Moon, T.S. Goh, I.D. Jung**, Detection of incomplete atypical femoral fracture on anteroposterior radiographs via explainable artificial intelligence, Accepted, Scientific Reports (IF: 4.997), 2023

40. U. Auyeskhan, C.S. Alex, S. Park, D.H. Kim, I.D. Jung, N. Kim, Virtual reality based assembly-level design for additive manufacturing decision framework involving human aspects of design, Accepted, Journal of Computational Design and Engineering (IF: 6.167, JCR < 11% in Engineering, Multidisciplinary), 2023

39. J.W. Park, E.H. Seo, H.E. Park, Y.C. Shin, H.G. Kang, H.K. Sung, I.D. Jung**, Hybrid Solid-Mesh Structure for Electron Beam Melting Customized Implant to Treat Bone Cancer, Accepted, International Journal of Bioprinting (IF: 7.422, JCR < 15% in Engineering, Biomedical), 2023

38. H.Y. Kim, J.W Lee, T.K. Kim, S.J. Park, H.M. Kim, I.D. Jung**, Advanced thermal fluid leakage detection system with machine learning algorithm for pipe-in-pipe structure, Accepted, Case Studies in Thermal Engineering (IF: 6.268, JCR < 11% in Thermodynamics), 2023

37. T.K. Kim, T.S. Goh, J.S. Lee, J.H. Lee, H.Y. Kim, I.D. Jung**, Transfer Learning-Based Ensemble Convolutional Neural Network for Accelerated Diagnosis of Foot Fractures, Accepted, Physical and Engineering Sciences in Medicine (IF: 7.099, JCR < 14% in Radiology, Nuclear Medicine & Medical Imaging), 2023

36. J.H. Kim, S.B. Park, J.H. Ahn, J. Y. Pyo, H.Y. Kim, N.H. Kim, I.D. Jung**, S.K. Seol, Meniscus-guided Micro-printing of Prussian Blue for Smart Electrochromic Display, Accepted, Advanced Science (IF: 17.521, JCR <5% in Materials Science, Multidisciplinary), 2023, Headline [SBS][연합뉴스][중앙일보][부산일보][매일경제][울산매일신문][조선비즈][디지틀조선일보][동아사이언스][뉴스1][파이낸셜뉴스][아이뉴스24][뉴시스][헤럴드경제][ZDNet Korea][메디컬투데이][디지털타임스][전기신문][철강금속신문][베타뉴스][베리타스알파][뉴스트리코리아][정보통신신문][기계신문][일요신문][에너지데일리][CNB뉴스]

35. T.K. Kim, J.G. Kim, S.E. Park, S.J. Park, H.S. Kim, N.H. Kim, H.J. Ha, S.K. Choi, C. Tucker, H.K. Sung, I.D. Jung**, Virtual Surface Morphology Generation of Ti-6Al-4V Directed Energy Deposition via Conditional Generative Adversarial Network, Accepted, Virtual and Physical Prototyping (IF: 10.962, JCR < 5% in Engineering, Manufacturing),  2023, Headline [KBS][연합뉴스][YTN사이언스][경상일보][울산제일일보][AI타임스][베리타스알파][기계신문][베타뉴스][뉴시스][메트로신문][인공지능신문][아시아경제][뉴스1][뉴스웍스][헬로디디][브레인미디어]


34. S.E. Park, J. G. Kim, I.D. Jung, J.B. Seol, H. Sung, Ultrastrong and stress corrosion cracking-resistant martensitic steels, Accepted, Acta Materialia (IF: 9.029, JCR < 5% in Metallurgy & Metallurgical Engineering), 2022

33. E.H. Seo, H.K. Sung, H.R. Jeon, H.Y. Kim, T.K. Kim, S.E. Park, M.S. Lee, S.K. Moon, J.G. Kim, H.Y. Chung, S.K.Choi, J.H. Yu, K.T. Kim, S.J. Park, N.H. Kim, I.D. Jung**, Laser Powder Bed Fusion for AI Assisted Digital Metal Components, Accepted, Virtual and Physical Prototyping (IF: 10.962, JCR < 5% in Engineering, Manufacturing),  2022, Headline [울산MBC][연합뉴스][부산일보][서울신문][서울경제][한국일보][울산매일신문][헤럴드경제][동아사이언스][뉴스1][뉴스웍스][전자신문][뉴시스][아이뉴스24][헬로티][디지털타임스][베리타스알파][ZDNet Korea][메트로신문][베타뉴스]

32. E.H. Seo, H.K. Sung, H.Y. Kim, T.K. Kim, S.E. Park, M.S. Lee, S.K. Moon, J.G. Kim, H.Y. Chung, S.K.Choi, J.H. Yu, K.T. Kim, S.J. Park, N.H. Kim, I.D. Jung**,  AI Augmented Digital Metal Component, Preprint, arXiv (DOI:, 2022

31. S.B. Park, S.H. Kayani, K.J. Euh, E.H. Seo, H.Y. Kim, S.E. Park, B.N. Yadav, S.J. Park, H.K. Sung, I.D. Jung**, High Strength Aluminum Alloys Design via Explainable Artificial Intelligence, Accepted, Journal of Alloys and Compounds (IF: 6.371, JCR < 6% in Metallurgy & Metallurgical Engineering), 2022, Headline [연합뉴스][서울경제][서울신문][헤럴드경제][베리타스알파][뉴시스][아이뉴스24][기계신문][케미컬뉴스][인공지능신문][ZDNet Korea][파이낸셜뉴스][정보통신신문][뉴스1]

30. T.J. Bak, K.S. Kim, E.H. Seo, J.Y. Han, H.K. Sung, I. Jeon, I.D. Jung**, Accelerated design of high-efficiency lead-free tin perovskite solar cells via machine learning, Accepted, International Journal of Precision Engineering and Manufacturing-Green Technology (IF: 4.660, JCR < 18% in Engineering, Mechanical), 2022

29. J.Y. Han, J.S. Nam, S.J. Seo, A. Lee, C.H. Lee, S.E. Park, Y.M. Kang, H.S. Lee, D.H. Kim, Q. Zhang, H.K. Sung, E. I. Kauppinen, H. Jeong, J.W. Oh, S. Maruyama, I.D. Jung*, I. Jeon, Utilization of Multifunctional Environment-Friendly Organic Dopants Inspired from Nature for Carbon Nanotube-Based Planar Heterojunction Silicon Solar Cells, Accepted, Advanced Energy and Sustainability Research (IF Pending), 2022

- 2022 -

28. S.E. Park, S.H. Kayani, H.R. Kim, I.D. Jung, N.S. Reddy, K.J. Euh, J.B. Seol, J.G. Kim, H.K. Sung, Effect of Interdendritic Precipitations on the Mechanical Properties of GBF or EMS Processed Al-Zn-Mg-Cu Alloys, Crystals(IF: 2.670), Vol. 11, pp. 1162, 2021

27. M.S. Lee, H.Y. Kim, Y.T. Koo, J.H. Yu, H.Y. Chung, N.H. Kim, H.K. Sung, I.D. Jung**, Selective Laser Melting Process for Sensor Embedding into SUS316L with Heat Dissipative Inner Cavity Design, Accepted, Metals and Materials International (IF:3.451), 2021

26. J.W. Park, Y.C. Shin, H.G. Kang, S. Park, E.H. Seo, H. Sung, I.D. Jung**, In vivo analysis of 3D-printed Ti-6Al-4V implant fracture post joint-preserving surgery to treat bone with cancer, Bio Design and Manufacturing (IF: 5.887), pp. 1-10, 2021, Headline [헤럴드경제][경상일보][한국경제][울산매일신문][신소재경제신문][동아사이언스][세계일보][뉴시스][울산제일일보][베타뉴스][아주경제][머니투데이]

25. J.S. Lee, H. Ha, J.B. Seol, J. G. Kim, E.H. Seo, S.K. Moon, I.D. Jung**, H. Sung, Reverse effect of hot isostatic pressing on high-speed selective laser melted Ti-6Al-4V alloy, Accepted,  Materials Science and Engineering: A(IF: 6.044, JCR < 11% in Metallurgy and Metallurgical Engineering), Vol. 807, 140880, 2021

- 2021 -

24. W.J. Ahn, J.W. Heo, D.C. Jang, K.G. Euh, I.D. Jung, S.S. Kim, H.K. Sung, Microstructural Evolution of Al–Zn–Mg–Cu Alloys in Accordance with Homogenization Time, Journal of Nanoscience and Nanotechnology, (IF: 1.134), Vol. 20, pp. 6890-6896, 2020

23. J. Lee, M. Lee, I.D. Jung, J. Choe, J.H. Yu, S. Kim, H.K. Sung, Correlation Between Microstructure and Tensile Properties of STS 316L and Inconel 718 Fabricated by Selective Laser Melting (SLM), Journal of Nanoscience and Nanotechnology (IF: 1.134), Vol. 20, pp. 6807-6814, 2020

22. I.D. Jung* et al., Embedding Sensors using Selective Laser Melting for Self-Cognitive Metal Parts, Additive Manufacturing (IF:11.632, JCR < 1% (Top) in Engineering, Manufacturing ), Vol. 33, 101151, 2020, Headline [헤럴드경제][경남매일신문][철강금속신문][신소재경제신문][헬로티][파이낸셜뉴스][쿠키뉴스][테크월드][아이뉴스24][뉴시스][CNB뉴스]

21. I.D. Jung, M. Kim et al., Selective Ion Sweeping on Prussian Blue Analogue Nanoparticles and Activated Carbon for Electrochemical Kinetic Energy Harvesting, Nano Letters (IF: 12.262, JCR < 8% in Physics, Applied), Vol. 20, pp. 1800-1807, 2020

20. M. Kim, I.D. Jung et al., An Electrochromic Alarm System for Smart Contact Lenses, Sensors and Actuators B: Chemical (IF: 9.221, JCR < 7% in Instruments & Instrumentation), Vol. 322, 128601, 2020,

19. I.D. Jung et al., Artificial Intelligence for the Prediction of Tensile Properties by Using Microstructural Parameters in High Strength Steels, Materialia (IF Pending), Vol. 11, 100699, 2020, Headline [경남일보][오늘경제][경남도민신문][신아일보][교수신문][노컷뉴스][한국강사신문][CNB뉴스][일요신문][프레시안][뉴시스][뉴스핌]

- 2020 -

18. I.D. Jung (Corresponding author), Microstructural Effects on the Tensile and Fracture Behavior of Selective Laser Melted H13 Tool Steel under Varying Conditions, Materials Characterization (IF: 4.537, JCR < 15% in Materials Science, Characterization & Testing), Vol. 155, 109817, 2019

17. I.D. Jung et al., Dual Speed Laser Re-Melting for High Densification in H13 Tool Steel Metal 3d Printing, Archives of Metallurgy and Materials (IF: 0.633), Vol. 64, pp. 571-578, 2019

16. D.S. Shin and I.D. Jung et al., Influence of physical and microstructural features on soft magnetic properties of injection molded Fe–Si–P alloys at low frequencies, Materials Chemistry and Physics (IF: 4.778), Vol. 241, 122384, 2019

15. D.S. Shin, J.W. Oh, I.D. Jung et al., Densification and Magnetic Properties of Injection Molded Gas- and Water-Atomized Fe–Si Alloys and Effect of Fe-10.2 wt% P Addition, Metals and Materials International (IF: 3.451), Vol. 26, pp. 94-106, 2019

14. D.S. Shin, S.H. Kim, J.W. Oh, I.D. Jung et al., Correlation Study Between Material Parameters and Mechanical Properties of Iron–Carbon Compacts Using Sensitivity Analysis and Regression Model, Metals and Materials International (IF: 3.451), Vol. 25, pp. 1258-1271, 2019

- 2019 -

13. X. Yin, W. Tang, I.D. Jung et al., Insights into morphological evolution and cycling behavior of lithium metal anode under mechanical pressure, Nano Energy (IF: 19.069, JCR < 6% in Materials Science, Multidisciplinary), Vol. 50, pp. 659-664, 2018

12. I.D. Jung et al., Laser melting characterization for H13-steel 3D Printing, Proceedings in ProAdditive Manufacturing (Singapore), Vol. 3, pp. 286-290, 2018

11. J. Choe, J. Yun, I.D. Jung, et al., Densifying Method in Additive Manufacturing process of H13 Tool Steel: Laser Re-Melting, Proceedings in Pro-Additive Manufacturing (Singapore), Vol. 3, pp. 232-236, 2018

10. I.D. Jung et al., Modeling of magnetic particle orientation in magnetic powder injection molding, Journal of Physics D : Applied Physics (IF: 3.409), Vol. 51(11), 2018

- 2018 -

9. Y. Seong, Y. Kim, I.D. Jung et al., Material characterization of single crystalline Cu subjected to high strain rates and high temperatures for multiscale simulation, Korean Journal of Metals and Materials (IF: 1.324) , Vol. 55, pp.760- 767, 2017

8. D.S. Shin, I.D. Jung et al., Development of powder injection molding process for sintered soft magnet with the addition of Fe-17 at. %P powder, Metal Powder Report, 2017

- 2017 -

7. I.D. Jung et al., Comprehensive viscosity model for magnetic particle dispersed silicone oil, Journal of Magnetism and Magnetic Material (IF: 3.097), Vol. 404, pp. 20-44, 2016

6. I.D. Jung et al., Two Phase Mater Sintering Curve for 17-4 PH, Metallurgical and Materials Transactions A (IF: 1.219), Vol. 47, pp. 5548-5556, 2016

- 2016 -

5. I.D. Jung et al., Magneto-rheological model for computational analysis of magnetic micro powder injection molding, Computational Materials Science (IF: 3.572), Vol. 100, pp. 39-44, 2015

4. I.D. Jung et al., Characterization and simulation of Ni-Based Superalloy Powder Feedstock for Powder Injection Molding, International Journal of Powder Metallurgy (IF: 0.333), Vol. 51, pp. 27- 34, 2015

- 2015 -

3. I.D. Jung et al., Particle size effect on the magneto-rheological behavior of powder injection molding feedstock, Materials Characterization (IF: 4.537, JCR < 15% in Materials Science, Characterization & Testing), Vol. 94, pp. 19-25, 2014

2. I.D. Jung et al., Rheological modeling of strontium ferrite feedstock for magnetic powder injection molding, Powder Technology (IF: 5.640), Vol.262, pp.198-202, 2014

- 2014 -

1. Y.M. Kim, S. Lee, J.W. Noh, S. H. Lee, I.D. Jung, S. J. Park, Rheological and sintering behaviors of nano-structured molybdeum powder, International Journal of Refractory Metals and Hard Materials (IF: 4.804, JCR < 13% in Metallurgy & Metallurgical Engineering), Vol.41, pp.442-448, 2013

- 2013 -

 (IF & JCR Best in published year or current year)

Korean Domestic Journals 

4. I.D. Jung et al., Additive Manufacturing for Sensor Integrated Components, KJMR, Vol. 27 (2), pp. 111-118, 2020 (Invited)

3. W. Ahn, J. Park, J. Lee, J. Choe, I.D. Jung et al., Correlation between Microstructure and Mechanical Properties of the Additive Manufactured H13 Tool Steel, KJMR, Vol. 28 (11), pp. 663-670, 2018

2. I.D. Jung et al., Simulation and Experiment of Injection Molding Process for Superalloy Feedstock, Journal of Korea Powder Metallurgy Institute, Vol. 22, pp. 1-5, 2015

1. I.D. Jung et al., Spark Plasma Sintering Behaviors of M-type Barium Hexaferrite Nano Powders, Journal of Korea Powder Metallurgy Institute, Vol. 21, pp.256-259, 2014