Go to the top

Professor

프로필

 

 

 

 

 

 

 

Im Doo Jung

Assistant Professor, Department of Mechanical Engineering, UNIST, South Korea

Contact: [email protected]

 

Education

Pohang University of Science and Technology (POSTECH), Ph.D. 2012.9~2016.2

Major: Mechanical Engineering

Pohang University of Science and Technology (POSTECH), B.S. 2003.3~2011.8

Major: Mechanical Engineering

Korea Science Academy of KAIST (KSA, former Busan Science High School), High school 2000.2~2003.2

Major: Science and Mathematics

 

Experiences

Assistant Professor, Department of Mechanical Engineering, UNIST, South Korea, 2020-Current

Senior Researcher, 3D Printing Materials Center, Korea Institute of Materials Science (KIMS), Korea, 2017-2019

Postdoc., School of EEE, Nanyang Technological University, Singapore, 2016-2017

Visiting Researcher, Dept. Of Mechanical Engineering, TU/e, Eindhoven, Netherlands, 2015

Visiting Researcher, Dept. of Mechanical Engineering, University of Waterloo, Canada, 2008-2009

Associate, POSCO, Korea, 2011-2012

 

Guest Editorial Board Member, Scientific reports, Springer Nature, London, UK, 2019- Current

Referee, IEEE ACCESS, IEEE, USA, 2019-Current

Referee, Materials Characterization, Elesvier, Amsterdam, Netherlands, 2019-Current

Referee, Metals and Materials International, Springer, Newyork, USA, 2018-Current

Referee, Biofabrication, IOP Publishing, London, UK, 2016-Current

Referee, Journal of Physics D: Applied Physics, IOP Publishing, London, UK, 2015.12-Current

 

 

Invited Talks 

1. Self-Powered IoT Sensor & Machine Learning for Remote Plant Monitoring, SK Innovations, Incheon, Korea, 2019

2. Smart Metal Parts Additive Manufacturing with Topology Optimization, Altair Technology Conference (ATC), Seoul, Korea, 2019

3. Additive Manufacturing for Smart Medical Implant, Pusan National University Hospital Biomedical Research Institute, Busan, Korea, 2019

4. Titanium Implant 3D Printing for Cancer Bone Replacement, National Cancer Center, Goyang, Korea, 2019

5. Self-Cognitive Metal Component via Additive Manufacturing, Asia-Korea Conference (AKC), Singapore, 2019

6. Self-Cognitive Metal Manufacturing via 3D Printing, Advanced Structural Material Symposium of Korean Institute of Metals and Materials, Busan, Korea, 2019

7. Additive Manufacturing for Aerospace Research, Gyungsang National University Research Center for Aircraft Parts Technology, Jinju, Korea, 2018

8. Electro-chemical Kinetic Energy Harvesting for Remote IoT System Powering, Korea Aerospace University Aviation Electronics Research Center, Goyang, Korea, 2018

 

Conference Presentations 

1. I.D. Jung et al., Machine Learning Approach for the Prediction of Mechanical Properties Based on the Steel Microstructure Volume Fraction Ratio, ASME-IDETC Conference, USA, 2019

2. I.D. Jung et al., SLM (Selective Laser Melting) Process is Applicable in Ti-6Al-4V Alloys for Aerospace Application, Powder Metallurgy and Additive Manufacturing of Titanium, USA, 2019

3. I.D. Jung et al., Artificial Intelligence for Prediction of Mechanical Properties of API Pipe Based on Microstructure, Korea Society for Precision Engineering Fall Conference, Changwon, Korea, 2019

4. I.D. Jung et al., Self-Cognitive Metal Component Development via Additive Manufacturing, ISIMP, Jeju, Korea, 2019

5. S.K. Moon, I.D. Jung, J.H. Yu, Optimized Re-Design for Additive Manufacturing, Korea Society for Precision Engineering Spring Conference, Jeju, Korea, 2019

6. I.D. Jung et al., Digital Twin Realization via Self-Cognitive Metal Components 3D Printing, Korea Society for Precision Engineering Spring Conference, Jeju, Korea, 2019

7. I.D. Jung et al., Tensile Deformation and Fracture Behaviors of Metal 3D Printed H13 Tool Steel Under Varying Conditions, PRESM, Vietnam, 2019

8. I.D. Jung et al., Self-Cognitive Metal Manufacturing via 3D Printing, Advanced Structural Material Symposium of Korean Institute of Metals and Materials, Busan, Korea, 2019

9. I.D. Jung et al., Two-step 3D Printing for Sensor Embedding in Metal Component,15th International Symposium of Novel and Nano Materials, Lisbon, 2018

10. J.H. Choe, S.M. Seo, J.Yun, I.D. Jung, D.Y. Yang, S.S. Yang, Y.J. Kim, J.H. Yu, Effect of Laser Parameter on Process Defects and Microstructure of Additively Manufactured IN738LC, 15th International Symposium of Novel and Nano Materials, Lisbon, 2018

11. I.D. Jung, T.G. Kang, S.J. Park, Magnetic Powder Orientation Modeling and Simulation for Magnetic Feedstock, The 7th Pacific Rim Conference on Rheology, Jeju, Korea, 2018

12. I.D. Jung et al., Laser melting characterization for H13-steel 3D Printing, 3rd International Conference on Progress in Additive Manufacturing, Singapore, 2018

13. J. Choe, J. Yun, I.D. Jung, D. Yang, S. Yang, Y. Kim, J. Yu, Densifying Method in Additive Manufacturing process of H13 Tool Steel: Laser Re-Melting, 3rd International Conference on Progress in Additive Manufacturing, Singapore, 2018

14. S.J. Park, I.D. Jung, Computer Aided Analysis of Powder Injection Molding and its applications, Korea Powder Metallurgy Institute, Spring, Korea, 2016

15. D.S. Shin, I.D. Jung, S.J. Park, H.J. Kim, J.H. Lee, Volume fraction effect of Fe/FeP onto soft magnetic property produced by powder injection molding, Korea Powder Metallurgy Institute, Spring, Korea, 2016

16. I.D. Jung, T.G. Kang, S.J. Kim, J.M. Park, S.J. Park, Modeling of particle orientation in Magnetic Powder Injection Molding, International Conference on Powder Metallurgy in Asia, Kyoto, Japan, 2015

17. S.J. Park, I.D. Jung, T.G. Kang, S.J. Kim, J.M. Park, Modeling of Magneto-Rheological Behavior of Powder Injection Molding Feedstock, International Conference of the Polymer Processing Society, Jeju, Korea, 2015

18. T.G. Kang, I.D. Jung, S.J. Park, S.J. Kim, J.M. Park, Numerical Simulation on Particulate Flows with Permanent Magnetic Particles Suspended in a Viscous Fluid, International Conference of the Polymer Processing Society, Jeju, Korea, 2015

19. I.D. Jung, D.S. Shin, H.J. Kim, J.H. Lee, S.J. Park, Research Association of Powder Injection Molding for Magnetic Application, Fall conference of Korea Powder Metallurgy Associate, Korea, 2015

20. S.J. Park, I.D. Jung, T.G. Kang, S.J. Kim, J.M. Park, Rheological Modeling of Magnetic Powder Injection Molding, International Symposium on Novel and Nano Materials, Poland, 2014

21. I.D. Jung, J.M. Park, J.H. Yu, T.G. Kang, S.J. Kim, S.J. Park, Particle size effect on the magnetorheological behavior of powder injection molding, Powder Metallurgy World Congress, Orlando, USA, 2014

22. S.J. Park, Y.J. Seong, I.D. Jung, S.J. Kim, S. Kim, S.G. Kim, H.J. Kim, Constitutive equation for high strain rates and high temperature at an atomic scale, International Symposium on Plasticity, Bahamas, 2014

23. I.D. Jung, S.J. Park, J.M. Park, T.G. Kang, S.J. Kim, The effect of applying magnetic field to the mold cavity during powder injection molding of SrFe12O9, Fall conference of Korea Powder Metallurgy Associate, Korea, 2014

24. S.J. Park, I.D. Jung, J.L. Johnson, R.M. German, Microgravity Liquid Phase Sintering of Tungsten Alloys, Spring conference of the Korean Microgravity Society, Korea, 2014

25. I.D. Jung, T.G. Kang, S.J. Park, S.J. Kim, J.M. Park, Sr-Fe powder orientation model for a single ellipsoidal magnetic particle immersed in a viscous shear flow, Spring conference of Korea Powder Metallurgy Associate, Korea, 2014

26. I.D. Jung, J.H. Jung, T.G. Kang, J.M. Park, S.J. Kim, S.J. Park, Oscillatory rheology for 17-4 PH magnetic feedstock for powder injection molding, Spring Conference of the Korean Society of Rheology, 2014

27. I.D. Jung, J.M. Park, J.H. Yu, S.J. Park, Particle size effect to the magneto rheological behavior of feedstock for magnetic PIM, Fall conference of Korea Powder Metallurgy Associate, Korea, 2013

28. I.D. Jung, S.J. Park, Y.M. Kim, Simulation of Ni-based superalloy powder for powder injection molding, Spring conference of Korea Powder Metallurgy Associate, Korea, 2013

29.E. Seo, I.D. Jung, Reverse Effect of Hot Isostatic Pressing on High-speed Selective Laser Melted Ti-6Al-4V Alloy, International Conference on Powder Metallurgy & Particulate Materials, USA, 2021

30.I.D. Jung et al., Convolutional Neural Network for Surface Roughness Prediction in Direct Energy Deposition of TiAl Alloy Powder, The Korean Powder Metallurgy & Materials Institute, Korea, 2021

31.Kim, I.D. Jung, Deep Convolutional Generative Adversarial Network for Surface Roughness Improvement in Direct Energy Deposition of Ti-6Al-4V Powder, The Korean Society of Mechanical Engineers, Ulsan, Korea, 2021

32.Seo, N. Kim, S.K. Moon, H. Sung, I.D. Jung, Effect of Build Angle on Surface Roughness of High-Speed Selective Laser Melted Ti-6Al-4V Alloy, 2nd International Conference on Advanced Surface Enhancement, Singapore, 2021

33.Kim, S. Park, J.G. Kim, H. Sung, H.S. Kim, I.D. Jung, Convolutional Neural Network for Surface Roughness Prediction in Direct Energy Deposition of Ti-6Al-4V Powder, International Symposium on Innovation in Materials Processing, Jeju, Korea, 2021

34.Seo, H. Sung, H. Kim, T. Kim, S. Park, M.S. Lee, S.K. Moon, J.G. Kim, H. Chung, S.K. Choi, J. Yu, K.T. Kim, S.J. Park, N. Kim, I.D. Jung, AI Augmented Digital Metal Component, International Symposium on Innovation in Materials Processing, Jeju, Korea, 2021

35.Y.T. Koo, I.D. Jung, AI prediction of 3D printed metal mesh structure via wifi signal disturbance, International Symposium on Innovation in Materials Processing, Jeju, Korea, 2021

36.Kim, M.S. Kim, H. Chung, N. Kim, H. Sung, J. Yu, I.D. Jung, Selective Laser Melting Process for Sensor Embedding into SUS316L with Heat Dissipative Inner Cavity Design, International Symposium on Innovation in Materials Processing, Jeju, Korea, 2021

37.Park, S.H. Kayani, K. Euh, E. Seo, H. Kim, S. Park, B.N. Yadav, S.J. Park, H. Sung, I.D. Jung, Artificial intelligence for aluminum alloys design, International Symposium on Innovation in Materials Processing, Jeju, Korea, 2021

38.I.D. Jung, AI augmented Digital Metal Components, The Korean Society of Mechanical Engineers, Seoul, Korea, 2022